H3CSE-Routing & Switching GB0-371-ENU Braindumps

H3C certification GB0-371-ENU exam is an important IT certification exam. But, it is not easy to pass GB0-371-ENU exam and get the certificate. Here, we would like to recommend ITCertKey's GB0-371-ENU exam materials to you. With the help of the GB0-371-ENU questions and answers, you can sail through the exam with ease.

ITCertKey is a good website that provides all candidates with the latest and high quality IT exam materials. H3C GB0-371-ENU braindumps on ITCertKey are written by many experienced IT experts and 99.9% hit rate. If you don't have time to prepare for GB0-371-ENU or attend classes, ITCertKey's GB0-371-ENU study materials can help you to grasp the exam knowledge points well. By using ITCertKey, you can obtain excellent scores in the H3CSE-Routing & Switching GB0-371-ENU exam.

ITCertKey H3C GB0-371-ENU braindumps are formulated by professionals, so you don't have to worry about their accuracy. They will efficiently lead you to success in H3C certification exam. We provide you with the latest PDF version & Software version dumps and you just need to take 20-30 hours to master these GB0-371-ENU questions and answers well. Our Software version dumps are the GB0-371-ENU test engine that will give you GB0-371-ENU real exam simulation environment.

ITCertKey will offer all customers the best service. We will give all customers a year free update service. Within one year, if the GB0-371-ENU practice test you have bought updated, we will automatically send it to your mailbox. If you don't pass your GB0-371-ENU exam, you just need to send the scanning copy of your examination report card to us. After confirming, we will give you FULL REFUND of your purchasing fees.

What's more, we provide you with the GB0-371-ENU free demo. Before you decide to buy the materials, you can download some of the GB0-371-ENU questions and answers.

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. After executing the display interface Ethernet 1/0/1 command on the switch SWA, the output information is as follows:
[SWA]display interface Ethernet 1/0/1
Ethernetl/0/1 current state: UP
PVID: 10
Mdi type: auto
Link delay is 0(sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
Port priority: 0
It can be judged from the above output

A) Data frames with VLAN20 tags cannot be forwarded from port Ethemet1/0/1
B) Data frames with VLAN10 tags will be discarded when they enter the port Ethernet1/0/1
C) Data with VLAN1 tags will be discarded when entering port Ethemet1/0/1
D) Data frames with VLAN10 tags will be stripped of tags when they leave port Ethemet1/0/1

2. The topology is shown in the figure, and the STP calculation is performed. The correct result is

A) SWD port E0/1 is the root port
B) SWA ports E0/1 and E0/2 are designated ports
C) The port E0/2 of SWA is an alternate port
D) Both ports E0/1 and E0/2 of SWD will receive configuration BPDUs

3. The following statements about the PIM joining process are correct:

A) The multicast joining path of DR in PIMSM is the optimal forwarding path from source to DR
B) The multicast joining path of DR in PIMDM is the optimal forwarding path from source to DR
C) The RP's multicast source joining path in PIMSM is the optimal forwarding path from the source to the RP
D) The multicast joining path of DR in PIMSSM is the optimal forwarding path from source to DR

4. The IP address of the host PCA is 40.1.1.1, and the MAC address is 0011.1111.1111. The PCA is connected to the GigabitEthernet1/0/1 port of the switch SWA. The following commands are configured on the switch SWA:
[SWA]vlan 10
[SWA-vlan10]quit
[SWA]vlan 20
[SWA-vlan20]protocol-vlan ipv4
[SWA-vlan20]quit
[SWA]vlan 30
[SWA-vlan30]quit
[SWA]mac-vlan mac-address 0011-1111-1111 vlan 30
[SWA]vlan 40
[SWA-vlan40]ip-subnet-vlan ip 40.1.1.0 255.255.255.0
[SWA-vlan40]quit
[SWA]interface GigabitEthernet 1/0/1
[SWA-GigabitEthernet1/0/1]port link-type hybrid
[SWA-GigabitEthernet1/0/1]port hybrid pvid vlan 10
[SWA-GigabitEthernet1/0/1]port hybrid vlan 10 20 30 40 untagged
[SWA-GigabitEthernet1/0/1]port hybrid protocol-vlan vlan 20 0
[SWA-GigabitEthernet1/0/1]port hybrid ip-subnet-vlan vlan 40
[SWA-GigabitEthernet1/0/1]mac-vlan enable
After the configuration is complete, it can be judged that PCA will join

A) VLAN40
B) VLAN20
C) VLAN 10
D) VLAN30
E) The configuration command is incorrect

5. To configure the Ethernet1/0/1 port of the switch SWA as a hybrid port, its PVID is VLAN20, and when sending VLAN20 data frames without tagging, when sending VLAN 10 data frames, then the following configuration Is the process correct (choose one or more)

A) [SWA]vlan10 [SWA-vlan 10]quit [SWA]vlan 20 [SWA-vlan20]quit [SWA]interface Ethernet 1/0/1 [SWA-Ethernet1/0/1]port link-type hybrid [SWA-Ethernet1/0/1]port hybrid pvid vlan 20 [SWA-Ethernet1 /0/1 ]port hybrid vlan 10 tagged
B) [SWA]vlan10 [SWA-vlan10]quit [SWA]vlan 20 [SWA-vlan20]quit [SWA]interface Ethernet 1/0/1 [SWA-Ethernet1/0/1]port link-type hybrid [SWA-Ethernet1/0/1]port hybrid pvid vlan 20 [SWA-Ethernet1/0/1]port hybrid vlan 10 tagged [SWA-Ethernet1 /0/1 ]port hybrid vlan 20 untagged
C) None of the above is correct
D) [SWA]vlan10 [SWA-vlan 10]quit [SWA]vlan 20 [SWA-vlan20]port Ethernet 1/0/1 [SWA-vlan20]quit [SWA]interface Ethernet 1/0/1 [SWA-Ethernet1 /0/1 ]port link-type hybrid [SWA-Ethernet1 /0/1]port hybridvlan 10 tagged
E) [SWA]interfaceEthernet 1/0/1 [SWA-Ethernet1/0/1]port link-type hybrid [SWA-Ethernet1/0/1]port hybrid pvid vlan 20 [SWA-Ethernet1/0/1]port hybrid vlan 10 tagged [SWA-Ethernet1/0/1]port hybrid vlan 20 untagged [SWA-Ethernet1/0/1]quit [SWA]vlan 10 [SWA-vlan10]quit[SWA]vlan 20

Solutions: